Permanent 'In-drawer' Thermal Monitoring for MCC
- Datacenters
- Oil & Gas
- Finance
- Utilities
- Healthcare
- Mining
- Marine
- Petrochemical
The Exertherm® 24x7 MCC Electrical Monitoring solution permanently monitors the thermal condition of the power ‘IN / OUT’ terminations at the rear of the drawer. The MCC solution is provided in a simple and easy to fit kit per drawer, comprising of Thermal Sensors, Datacard & LED status light. The solution provides local & remote Thermal and Phase Imbalance alarms.
- Datacenters
- Oil & Gas
- Finance
- Utilities
- Healthcare
- Mining
- Marine
- Petrochemical
Inside the MCC Drawer
-
Our non-powered Sensors connect directly to the critical incoming / outgoing power connections, continuously monitoring temperature
-
The MCC Datacard collects the Sensor temperature data to activate alarms when a fault is detected
-
LED displays system status
Features
- Supplied in kit form per MCC Drawer
- Disconnects and removes with drawer
- Drawer mounted LED provides local visual condition status
- Thermal Alarms via relay and Modbus to SCADA/BMS
- OEM Vendor Neutral
- Phase imbalance alarm for motors
Benefits
- 24/7 All Year Round Protection
- Reduced Risk of Outages
- Increased Safety
- Low cost Fit and Forget solution
- No future inspection downtime
- Suitable for new build or retrofit
Why Exertherm?
Exertherm® is the global number one provider of 24x7 Thermal Condition Monitoring for electrical infrastructure, successfully installed worldwide by all major OEMs. We deliver complete solutions for LV/MV Switchgear, MCC Drawers, Dry Transformers and more. We’re so proud of our proven reliability we even offer a zero maintenance lifetime guarantee.
-
World No.1 Thermal Condition Monitoring Solution with Proven Reliability
-
Zero Maintenance & Lifetime Guarantee on Sensors
-
Complete Thermal Monitoring Solution for LV/MV Bus, Cable, MCC + TX
-
Sensors providing accurate data of uniform quality are a key part of the IIOT jigsaw - no sensors = no data
-
Wireless sensors pose a potential hacking threat to critical infrastructure. Exertherm is hardwired, and thus avoids any potential hacking issues.
-
Exertherm solutions are accepted & have been successfully installed in major projects globally by all major OEMs.
Find out what makes Exertherm® the World’s No.1 choice in our brochures and white papers.
What’s included in the Exertherm® MCC ‘In-Drawer’ kit?
- Datacard Collects Sensor Data
- Status LED Displays current monitoring status
- Sensor Loom Connects to key monitoring points within the MCC
*Components and quantities will vary based on your requirements.
Connectivity
The MCC thermal monitoring ‘In-drawer’ solution can be connected in 3 ways.
Relay Only
Local status LED + local/remote alarms.
Exertherm® ARM XL HMI
Local graphics on HMI & status LED + local/remote alarms + transfer of raw data via Modbus TCP/IP.
Exertherm® MCC Aggregator
Local status LED + local/remote alarms + transfer of raw data via Modbus 485.
- Global OEM Approval
- 24x7 Thermal Protection
- Zero Maintenance
- Lifetime Guarantee
- Simple Installation